17mm Special Flare Nut Socket, 3/8" Drive
17 mm slotted socket for TDI injection line nuts. The relief slips over the line so you can drive the nut with a 3/8" ratchet, extension, or torque wrench.
While not required for a pump reseal or an injector job, if you work on a lot of TDIs this is well worth having. It's faster than an open-end wrench, and because it grips the nut all the way around instead of on two flats, you're far less likely to damage a Common Rail injector. It also allows you to use a torque wrench.
- Best way to service Common Rail injector lines
- 17 mm
- 3/8" drive
- Torque wrench compatible
- Manufactured in Taiwan by HCB