Crank Seal Press Set replacing VW tool T10053
Cup and cone installer for the 35mm front crankshaft seal on 4-cylinder VW TDI engines. Perfectly guides the PTFE seal lip over the crank nose without rolling it, and the cup presses the seal in straight to the correct depth. Two bolts are included to draw the cup in.
- Replaces VW/Audi tool T10053
- For the PTFE front crank seal 038103085E, used on all 4-cylinder TDI cranks from 1998 to 2014 and many VW/Audi gas engines
- Includes the cup, cone and two pressing bolts
- Manufactured in Taiwan by HCB
- Not applicable to 1996-1998 engines w/ 32mm seal, or 2015 year model engines w/ integrated seal and carrier
- Tip - We advise against replacing a cam seal that isn't leaking...even if you're right there!
The center crankshaft sprocket bolt will require a counter-hold tool for removal and install. Extract the old seal with our 35mm crank seal extractor 3203 <LINK>. The center M16 crank sprocket bolt must be replaced during reassembly. ALH and CKRA use the 54 mm bolt WHT005322, while PD, CBEA and CJAA use the 59 mm bolt WHT004573. Torque spec is 89ftlbs + 90°
Watch our VW cam and crank seal video for some helpful tips. (And feel free to speed things up with the 'gear' icon.)